If you looking for
cpu cooler than this a great product from Noctua.
Product Features :
Blade Geometry : Nine Blade Design with VCN; RPM +/- 10% : 1300 RPM ( standard ), 1100 RPM ( w/ L.N.A ), 900RPM ( w/ U.L.N.A.)
Fan Size : 120 x 120 x25mm ( Compatible with 120 x 120 x 38mm ), Available for Two Fans installed.Bearing Type : SSO-Bearing
RPM +/- 10% : 1300 RPM, 1100 RPM ( w/ L.N.A ), 900RPM ( w/ U.L.N.A.).Air Flow : 92.3m³/h, 78.5m³/h ( w/L.N.A. ), 63.4m³/h ( W/ U.L.N.A )
Material : Copper ( Base and Heat-pipes), Alum.( cooling Fins ), Soldered Joints, Nickel Plated; Weight : 1.7 Lbs ( With Fan )
Features :Award-winning NH-U12P Heatsink, Raised Fin-stack of U-type Design for Perfect airflow direction and excellent compatibility.
Technical Details :
Review By Harribull ( Atlanta ) :
Product is very nice. When it says in the instructions turn screw till it stops.. they mean it... the screw will snap if you torc it at all but they will send you new ones free. Fans are very quiet, unit is very very tall. I installed the Noctua CPU heatsink solution in in a Coolmaster 690 II Advanced case and could not install the upper side cover fan with the Noctua heatsync in the system. Case is too narrow or heatsync is too tall depending on how you look at it.
The Noctua instructions say you may have to remove the fins from Dominator
memory installed with this heatsync solution but this was not required with the fans oriented to blow towards the rear of the case (recommended for optimal air flow) on an
ASUS P6X58D
motherboard. I really like the Noctua CPU heatsync solution and would buy it again. Fans are very very quiet
This cooler was extremely easy to install and provides excellent cooling to the CPU. Highly recommended.
